The main tool used to install sandwich panels is the screw. Various types of screws can be used for sandwich panel installation. The existence of different types of screws for this task has made installing sandwich panels a specialized task because for each type of sandwich panel, the appropriate screw must be selected, because if the installation is not done correctly, the installation of the structure will be difficult. In this article from Parsin Gostar, we will introduce the types of screws for installing sandwich panels.
Types of screws for installing sandwich panels
One of the main tools for installing prefabricated panels is screws. In this section, you will learn about the types of screws used in installing sandwich panels and the technical specifications of each.
Galvanized drill head screw with washer
The most common choice for installing these panels is the galvanized washer-type cap screw. The head of these screws is designed in the shape of a hexagon and a number 10 box wrench is used to tighten and loosen it. This screw itself is divided into five different categories based on length, which are:
- 2 inch cap screw
- 3 inch cap screw
- 4 inch cap screw
- 5 inch cap screw
- 6 inch cap screw
These screws consist of several parts. First, there is the washer part of the screw, which is located under the hexagonal part of the screw. The washer fills the hole well after the screw is tightened and seals the hole. Another reason for using a washer between the nut and the connecting piece is to increase the amount of friction and prevent the nut from loosening.
The other part of the page is the threaded part. This part is called the end part of the screw head, which is shaped like a drill and can drill holes in sandwich panels and substructure profiles well.
Allen screw or lens head
Pan head screws or Allen screws are another option that can be used when installing sandwich panels. Using a small number of these screws can provide adequate strength and efficiency when installing prefabricated panels, and this is the biggest advantage of choosing Allen screws for this task. In this way, the strength of the structure can be increased by creating fewer holes and less stress in the part.
The head of these screws has a recessed hexagon at the top, and special wrenches called Allen wrenches are used to open and close the screw. These screws are designed for use in various areas with limited access.
Choosing the best screws for installing sandwich panels
In all systems, characteristics such as screw type, screw head, screw material, or dimensions are used to introduce screw types. Therefore, choosing the best type of screw for installing sandwich panels should be based on the installer’s knowledge of the panels and the type of screws suitable for installing them. This is what makes installing sandwich panels a specialized task that requires skill and experience, and it is recommended that specialized labor be used for this task.
Prices of various screws for installing sandwich panels
Installing sandwich panels requires high skill and special tools. Therefore, for the strength and durability of the structures, it is necessary to entrust the work of implementing and implementing prefabricated panels to specialists. The price of screws for installing sandwich panels will vary depending on factors such as the type of screw, dimensions, quality of construction, and the manufacturer’s brand.
The importance of screws in installing sandwich panels
Screws are the only tool that firmly attaches prefabricated panels to the substructure profile, so the strength and rigidity of the structure is directly related to the type of screw selected. Typically, special screws are used to install wall or ceiling panels, and the type of sandwich panel used will also play an effective role in the selection of the type of screw. The most common type of screw used in the installation of types of sandwich panels is the galvanized drill head screw, which is used in the installation of various wall and ceiling panels. The quality of this screw will ensure the strength and longevity of the structure.
summary
Installing sandwich panels is a specialized task that requires high skill in terms of choosing the type of screws and the installation method. Specialized tools such as special screws and wrenches are used in this task. Having sufficient information about the characteristics of the screws available for this task and also choosing the right screw plays an important role in the lifespan and strength of the structure. Two types of galvanized head screws and lens head screws are used to secure the panels to the substructure profile, each of which has specific technical specifications that are mentioned in the text of the article.
